2011 Toyota Prius

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Play in steering rack inner joint(s) ()

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Play in steering rack inner joint(s) ()

Central Exhaust mounting defective Missing./ Not insecure. (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both. Suspension arms also fairly corroded. (5.3.4 (a) (i))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Suspension component corroded but not seriously weakened Corrosion of both front shock absorber casings/spring pans and rear trailing beam axle. (5.3.3 (b) (i))

Offside Headlamp aim unable to be tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Central Exhaust mounting defective Missing./ Not insecure. (6.1.2 (a))

Engine oil low.

Front Suspension arm pin or bush worn but not resulting in excessive movement Both. Suspension arms also fairly corroded. (5.3.4 (a) (i))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 45% imbalance recorded. (1.2.1 (b) (i))

Suspension component corroded but not seriously weakened Corrosion of both front shock absorber casings/spring pans and rear trailing beam axle. (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front arms rear bushes split (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Outer Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Items removed from driver's view prior to test ()

Nearside Front Inner Tyre worn close to legal limit/worn on edge worn on edge (5.2.3 (e))

Suspension arm pin or bush worn but not resulting in excessive movement both front arms rear bushes split (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone arms rear bush slightly split (5.3.4 (a) (i))

Brake pipe excessively corroded both front to rear (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm 215/45 r17 (5.2.3 (e)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone arms rear bush slightly split (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material both front to rear [rear section] (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, but not excessively surface rust (1.1.14 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both lower wishbone arm rear bushes slightly split (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both. Wishbone rear bush. (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)