MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Suspension component mounting prescribed area is corroded but not considered excessive Undersills sills underside (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Drive shaft joint constant velocity boot severely deteriorated inner (6.1.7 (g) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Drive shaft joint constant velocity boot severely deteriorated inner (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
all brake pips covered in under seal
under side coated in under seal
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension arm mount (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle heavily undersealed
Some of rear brake pipes coated in underseal
Various areas of underside of vehicle heavily coated in underseal
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg holed at front subframe rear mount (5.3.6 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Rear Service brake excessively fluctuating Both sides (1.2.1 (e))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Underside of vehicle towards rear heavily coated in underseal
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Mechanical brake component has restricted free movement (3.5.1k) DANGEROUS
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Stop lamp not working (1.2.1b)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.C.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Brake pipe slightly corroded (3.6.B.2c)
rear brake discs corroded
Offside Track rod end ball joint has excessive play (2.2.B.1f)
nearside reverse light broken
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Towbar component slightly corroded (6.6.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SA55 FAF is a 2006 Mercedes-benz Vito in Red with a 2,148cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2006 Mercedes-benz Vito models, the average MOT pass rate is 69.6% with a typical mileage of 121,092 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying SA55 FAF, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 20 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SA55 FAF?
You can check the full history of SA55 FAF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SA55 FAF registered?
SA55 FAF is a 2006 Mercedes-benz Vito, first registered on 23 February 2006.
Is SA55 FAF safe to buy?
The MOT history for SA55 FAF shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SA55 FAF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SA55 FAF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.