2008 Toyota Aygo

Central Front Brake pipe excessively corroded brake pipe above subframe is thin (1.1.11 (c))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area excessively damaged significantly reducing structural strength Both rear axel mounts have holes with in 30cm (5.3.6 (a) (i))

Central Integral body structure is corroded but structural rigidity is not significantly reduced Underfloor is getting thin at the middle (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both front discs (1.1.14 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive Both front areas are thin (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive filter corroded (8.4.1 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive filter corroded (8.4.1 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Offside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Rear Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner side (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting area (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner side (1.1.14 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone, rear bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting area (5.3.6 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Brake pipe slightly corroded front - rear (3.6.B.2c)

Offside Brake pipe slightly corroded front - rear (3.6.B.2c)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Brake pipe slightly corroded front - rear (3.6.B.2c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Brake pipe slightly corroded front - rear (3.6.B.2c)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)