MOT Status
ExpiredMileage
94,089 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))
Nearside Front Upper Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))
Nearside Rear Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))
Offside Rear Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor too sill (6.1.1 (c) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
handbrake has travel
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner and outer sill (5.3.6 (a) (i))
Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
handbrake has travel
Front Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
exhaust corroded
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
exhaust corroded
Front Brake disc worn, pitted or scored, but not seriously weakened Very corroded (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened Very corroded (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Brake pad(s) wearing thin both front (1.1.13 (a) (ii))
Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Nearside Rear outer arch corroded
Brake pipe corroded, covered in grease or other material both front to rear slight corroded at front (1.1.11 (c))
Coil spring corroded both front (5.3.1 (b) (i))
Coil spring corroded both rears (5.3.1 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
both rear tyres cracking outer wall
front sub frame corroded
under vehicle corroded but no holes or weak
Nearside Rear Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))
Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))
Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded front to rear pipe (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
both front tyres worn inner edge
Front Exhaust system not adequately supported (7.1.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Wheel bolt(s) missing (4.2.A.1e)
Offside Rear rear brake binding (3.7.B.1)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
surface corrosion front subframe
Nearside Braking system leaking front to rear brakepipe (3.6.A.1)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
surface corrosion front subframe
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Brake pipe leaking (3.6.A.1)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
front discs worn
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SA58 PYU is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 50%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SA58 PYU, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SA58 PYU?
You can check the full history of SA58 PYU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SA58 PYU registered?
SA58 PYU is a 2008 Toyota Aygo, first registered on 26 September 2008.
Is SA58 PYU safe to buy?
The MOT history for SA58 PYU shows 28 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SA58 PYU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SA58 PYU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.