2009 Mini First

Clutch slave cylinder metal pipe corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Clutch slave cylinder metal pipe corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Clutch slave cylinder steel pipe corroded

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Lower Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Clutch slave cylinder steel pipe corroded

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

exhaust heat shield insecure

under trays fitted

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

exhaust heat shield insecure

under trays fitted

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Sub-frame modified but not seriously weakened slightly corroded (5.3.3 (c) (i))

nearside front strut mountain attachment slightly corroded

offside front suspension arm slightly corroded

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust emits visible black smoke at idle (8.2.1.2 (f))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Brake disc worn, pitted or scored, but not seriously weakened all brake discs (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened lower arms both sides (5.3.3 (b) (i))

Bonnet primary retaining device ineffective cable broken (3.1 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Subframe mounting prescribed area is corroded but not considered excessive and rear subframe (5.3.6 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Bonnet pull damaged

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Rear Body component damaged and likely to cause injury Light smashed (6.2.1 (a) (i))

Bonnet pull damaged

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

o/s/r light cover broken

Emissions not tested (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

o/s/r light cover broken

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both front suspenion top mounts showing slight deterioration.

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

both front suspenion top mounts showing slight deterioration.

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS