MOT Status
ExpiredMileage
54,749 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe inadequately clipped (3.6.B.1)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre fouling a part of the vehicle (4.1.D.2)
Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.5c)
Steering column movement between the shaft and steering wheel (2.1.2b)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Outer Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Battery is inscure
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Brake cable has wires broken and is significantly weakened (3.5.1b)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
movement in indicator/wiper switch
Brakes imbalanced across an axle (3.7.B.5b)
Driver's seat insecure (6.2.A.1)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Steering rack gaiter split (2.2.D.2d)
movement in passenger front seat base
How Reliable is the Austin Mini 1000 City E?
Based on 44,703 MOT tests across 5,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SAB 526Y is a 1983 Austin Mini 1000 City E in Red with a 998cc petrol engine. This vehicle has been through 8 MOT tests with a personal pass rate of 62.5%.
Across all 1983 Austin Mini 1000 City E models, the average MOT pass rate is 64.4% with a typical mileage of 59,242 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini 1000 City E fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 3,881 recorded failures. If you're considering buying SAB 526Y, it's worth having these areas checked by a mechanic before committing.
The Austin Mini 1000 City E typically stays on UK roads for around 44 years. At 43 years old, this Austin Mini 1000 City E is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SAB 526Y?
You can check the full history of SAB 526Y by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SAB 526Y registered?
SAB 526Y is a 1983 Austin Mini 1000 City E, first registered on 10 March 1983.
Is SAB 526Y safe to buy?
The MOT history for SAB 526Y shows 8 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SAB 526Y have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SAB 526Y. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.