MOT Status
ValidMileage
129,668 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened and covered in oil (5.3.3 (b) (i))
all rear suspension corroded and cover in oil
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill (5.3.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened and covered in oil (5.3.3 (b) (i))
all rear suspension corroded and cover in oil
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor section corroded (7.1.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Child Seat fitted not allowing full inspection of adult belt
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front tyre worn bald on outer edge
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake pads worn to minimum thickness
Offside Front tyre worn bald on inner and outer edges
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear tyre worn bald on inner edge
Rear brake cable ends corroded
exhaust deteriorated
Offside Rear Anti-roll bar linkage fractured (2.4.G.1)
Child Seat fitted not allowing full inspection of adult belt
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front tyre worn bald on outer edge
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake pads worn to minimum thickness
Offside Front tyre worn bald on inner and outer edges
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear tyre worn bald on inner edge
Rear brake cable ends corroded
exhaust deteriorated
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust deteriorated
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust deteriorated
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust deteriorated
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust deteriorated
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
brake disc in such a condition that it is seriously weakened (3.5.1i)
brake disc in such a condition that it is seriously weakened (3.5.1i)
Front brake disc slightly scored (3.5.1h)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Registration plate lamp not working (1.1.5c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly scored (3.5.1h)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SB06 VTY is a 2006 Ford Focus C-max in Blue with a 1,560cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Ford Focus C-max models, the average MOT pass rate is 73.4% with a typical mileage of 70,386 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying SB06 VTY, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 20 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SB06 VTY?
You can check the full history of SB06 VTY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SB06 VTY registered?
SB06 VTY is a 2006 Ford Focus C-max, first registered on 30 June 2006.
Is SB06 VTY safe to buy?
The MOT history for SB06 VTY shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SB06 VTY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SB06 VTY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.