2008 Toyota Aygo

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust has a major leak of exhaust gases at backbox and centre section (6.1.2 (a))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake pipe corroded, covered in grease or other material front to rear brake pipes at rear flexi pipes covered in grease (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Brake pad(s) wearing thin front inner pads (1.1.13 (a) (ii))

Brake pipe corroded, covered in grease or other material front to rear brake pipes at rear flexi pipes covered in grease (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Slight deterioration in front suspension wishbone rear bushes & antiroll link rubbers. Minor corrosion brake pipes at rear.

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust system corroded

Front wishbone rear bushes perrished

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Exhaust system corroded

Front wishbone rear bushes perrished

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside front tyre at 2mm. Slight deterioration front suspension wishbone bushes & Anti roll link rubbers. Slight corrosion rear brake pipes.

Slight deterioration front suspension arm rear bushes & antiroll link rubbers.

Slight perishing front suspension wishbone rear bushes & anti roll link bushes.

Offside Front position lamp(s) not working (1.1.A.3b)

Slight perishing front suspension wishbone rear bushes & anti roll link bushes.

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside front tyre has small nailin outer tread. Nearside rear tyre jsut above minimum, offside rear tyre approx 3mm & both slightly perished.

Nearside front tyre has small nailin outer tread. Nearside rear tyre jsut above minimum, offside rear tyre approx 3mm & both slightly perished.

Slight deterioration in front suspension wishbone rear bushes & antiroll link rubbers. Rear tyres slightly perished (just less than 3mm).

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Slight deterioration in front suspension wishbone rear bushes & antiroll link rubbers. Rear tyres slightly perished (just less than 3mm).

Nearside rear brake binding (3.7.B.1)

Slight perishing in front antiroll links & wishbone rear bushes.

Slight perishing in front antiroll links & wishbone rear bushes.

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)