MOT Status
ValidMileage
106,239 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Front Coil spring corroded both (5.3.1 (b) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive both side heavily sealed (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sills (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner outer sills (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Coil spring corroded both (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Offside/nearside (5.3.4 (a) (i))
Front Play in steering rack inner joint(s) ()
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced Offiside/nearside (6.1.1 (c) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement N/s off/s front (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Wheel bearing slightly noisy N/s off/s front (5.1.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement N/s off/s front (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Wheel bearing slightly noisy N/s off/s front (5.1.3 (b) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust system insecure (6.1.2 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Emissions not tested (8.2.1.2 (d))
Exhaust silencer insecure (8.1.1 (b) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Exhaust emits visible black smoke at idle (8.2.1.2 (f))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust system insecure (6.1.2 (a))
Nearside Front Anti-roll bar linkage corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Anti-roll bar linkage corroded and seriously weakened (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
both rear tyres cracking
Child seat fitted not allowing full inspection of adult belt
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both rear tyres slight cracking on tread pattern
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Child seat fitted not allowing full inspection of adult belt
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in offside rear tyre
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both rear tyres slight cracking on tread pattern
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SB08 LWZ is a 2008 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SB08 LWZ, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SB08 LWZ?
You can check the full history of SB08 LWZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SB08 LWZ registered?
SB08 LWZ is a 2008 Toyota Aygo, first registered on 4 July 2008.
Is SB08 LWZ safe to buy?
The MOT history for SB08 LWZ shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SB08 LWZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SB08 LWZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.