2011 Suzuki SX4

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

underbody age related corrosion

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords WORN ON OUTER EDGE (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords WORN ON OUTER EDGE (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear pipe slightly corroded (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material slightly corroded (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material slightly corroded (1.1.11 (c))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Brake pipe corroded, covered in grease or other material front to rear pipe slightly corroded (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material slightly corroded (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material slightly corroded (1.1.11 (c))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake lever has little reserve travel (3.1.6b)