CarVerify

Free Car Check

SB52 EYM

2003 Mazda 323

Silver Petrol 1598cc
Search another vehicle

MOT Status

Expired
Expires27 May 2014
Tests12 (7 pass, 5 fail)
Pass rate58.3%

Mileage

96,267 mi
Last recorded96,267 miles
Recorded on16 May 2014
Typical for 2003 Mazda 32357,526 mi

Significantly above average — investigate

4 checks still locked for this Mazda
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £9.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationSB52 EYM
MakeMazda
Model323
Year2003
ColourSilver
Fuel typePetrol
Engine1,598cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

7 pass 5 fail
Fail 16 May 2014 96,267 miles

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front wheel bearing has excessive play (2.5.A.3c) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nail in nearside rear tyre

Nail in offside rear tyre

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Oil leak

nearside rear bumper support is holed/corroded

nearside windscreen wiper is torn

offside engine mount fixing is corroded

offside front tyre wearing on outer edge

offside rear bumper support is holed/corroded

sump is porous

under side of car is corroded

Pass 21 May 2013 88,039 miles

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

eml on

o/s/f inner wing corroded

oil leak

Fail 17 May 2013 88,039 miles

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

eml on

o/s/f inner wing corroded

oil leak

Fail 10 May 2013 87,876 miles

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

advise corrosion on o/s/f inner wing

engine management light was on at time of test

Pass 23 May 2012 79,440 miles
Fail 23 May 2012 79,440 miles

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Pass 11 May 2011 68,107 miles
Pass 18 May 2010 60,052 miles

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front front brake juddering slightly (3.7.A.2b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front front brake juddering slightly (3.7.A.2b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Pass 13 May 2009 52,253 miles
Pass 28 May 2008 45,247 miles
Fail 28 May 2008 45,246 miles

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Pass 18 Jan 2007 32,741 miles

How Reliable is the Mazda 323?

Based on 823,541 MOT tests across 88,407 vehicles.

67.3%
Pass Rate
5,454
Miles/Year
38
Year Lifespan
88,407
On UK Roads

Top MOT Failure Points

Tyre tread depth below requirements of 1.6mm 53,662
Suspension component mounting prescribed area is excessively corroded 39,672
Brake pipe excessively corroded 31,356
Anti-roll bar linkage has excessive play in a ball joint 30,442
Windscreen wiper does not clear the windscreen effectively 27,947
Full Mazda 323 reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

SB52 EYM is a 2003 Mazda 323 in Silver with a 1,598cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 58.3%.

Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.

The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying SB52 EYM, it's worth having these areas checked by a mechanic before committing.

The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.

Frequently Asked Questions

How do I check the history of SB52 EYM?

You can check the full history of SB52 EYM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was SB52 EYM registered?

SB52 EYM is a 2003 Mazda 323, first registered on 10 January 2003.

Is SB52 EYM safe to buy?

The MOT history for SB52 EYM shows 12 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does SB52 EYM have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SB52 EYM. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.