MOT Status
ValidMileage
82,843 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced at rear axle mount (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and floor (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and floor (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle Mount (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle Mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Emissions unable to be completed (8.2.1.2 (d))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Brake pipe excessively corroded Front to Rear (1.1.11 (c))
Offside Brake pipe corroded, covered in grease or other material Front To Rear (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
both front tyres badly scrubbing
both rear tyres badly perishing
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
both front tyres badly scrubbing
both rear tyres badly perishing
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside front brake excessively fluctuating (3.7.B.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SB60 VCE is a 2011 Peugeot 107 in Grey with a 998cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2011 Peugeot 107 models, the average MOT pass rate is 79.1% with a typical mileage of 47,205 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying SB60 VCE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 15 years old, this Peugeot 107 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SB60 VCE?
You can check the full history of SB60 VCE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SB60 VCE registered?
SB60 VCE is a 2011 Peugeot 107, first registered on 31 January 2011.
Is SB60 VCE safe to buy?
The MOT history for SB60 VCE shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SB60 VCE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SB60 VCE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.