2011 Mazda MX-5

Previous welding repairs to rear

Vehicle has been undersealed

Body mounting fixing insecure, but overall security not significantly reduced Centre Section bolted behind subframe (6.2.2 (c) (i))

Exhaust has a minor leak of exhaust gases Centre Section Box (6.1.2 (a))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Body mounting fixing insecure, but overall security not significantly reduced Centre Section bolted behind subframe (6.2.2 (c) (i))

Exhaust has a minor leak of exhaust gases Centre Section Box (6.1.2 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive body tub behind rear wheel arch (5.3.6 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive body tub behind rear wheel arch (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and floor sections (6.1.1 (c) (i))

all welded repairs are coated in underseal

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Sub-frame corroded and seriously weakened corroded and holed in two places (constructed from several sections welded together) (5.3.3 (b) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive body tub behind rear wheel arch (5.3.6 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive body tub behind rear wheel arch (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and floor sections (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and floor panels (6.1.1 (c) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / floor section (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and floor panels (6.1.1 (c) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Items removed from driver's view prior to test ()

Nearside Front Tyre worn close to legal limit/worn on edge worn outer (5.2.3 (e))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting support bracket (6.2.2 (d) (i))

Nearside Rear Anti-roll bar linkage likely to become detached already detached (5.3.3 (a) (ii)) DANGEROUS

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Items removed from driver's view prior to test ()

Nearside Front Tyre worn close to legal limit/worn on edge worn outer (5.2.3 (e))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security support bracket (6.2.2 (d) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

body, axle and chassis corrosion

exhaust system corroded

Emissions not tested (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

body, axle and chassis corrosion

exhaust system corroded

Nearside Rear Tyre worn close to legal limit/worn on edge tyre on 3mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge tyre on 2mm (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

suspension parts corroded

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)