MOT Status
ExpiredMileage
6,414 miNot all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside rear brake binding (3.7.B.1)
rear brakes release unevenly (3.7.B.4)
rear brakes release unevenly (3.7.B.4)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has a minor leak of exhaust gases manifold to front pipe (7.1.2)
Exhaust has a minor leak of exhaust gases tail pipe (7.1.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside rear brake binding (3.7.B.1)
Offside Headlamp not working on dipped beam (1.7.5a)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
Exhaust has a minor leak of exhaust gases manifold to front pipe (7.1.2)
Exhaust has a minor leak of exhaust gases tail pipe (7.1.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded all (3.6.B.2c)
Front Exhaust has a minor leak of exhaust gases and rear (7.1.2)
Suspension component mounting prescribed area is corroded but not considered excessive all over. (2.4.A.3)
Exhaust system not adequately supported (7.1.1)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Horn not working (1.6.2a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Front front brake binding (3.7.B.1) DANGEROUS
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Headlamp aim too low (1.8)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp aim too low (1.8)
offside front tyre deteriorated & cracked
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside front tyre deteriorated & cracked
Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
How Reliable is the Bedford Van?
Based on 956 MOT tests across 220 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SBR 360J is a 1971 Bedford Van in Blue with a 1,057cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 54.5%.
The most common reason a Bedford Van fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 165 recorded failures. If you're considering buying SBR 360J, it's worth having these areas checked by a mechanic before committing.
The Bedford Van typically stays on UK roads for around 41 years. At 55 years old, this Bedford Van is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SBR 360J?
You can check the full history of SBR 360J by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SBR 360J registered?
SBR 360J is a 1971 Bedford Van, first registered on 1 July 1971.
Is SBR 360J safe to buy?
The MOT history for SBR 360J shows 11 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SBR 360J have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SBR 360J. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.