MOT Status
ExpiredMileage
103,954 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassie rail (6.2.2 (d) (ii)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Inner Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced sill (2.4.G.1)
Nearside Rear Outer Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced sill (2.4.G.1)
Offside Rear Outer Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced sill (2.4.G.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Track rod end ball joint has slight play (2.2.B.1f)
eml on
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Brake hose twisted (3.6.B.4c)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
BRAKE PEDAL SPONGY ADVISE REPAIR.
Engine management light on advise repair.
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Nail in tyre ()
Offside rear wheel bearing has slight noise advise repair.
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
both engine management and airbag warning lights on
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Fluid suspension unit leaking (2.4.D.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear wheel bearing rough when rotated (2.6.1)
Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp aim too high (1.8)
both engine management and airbag warning lights on
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside front brake binding (3.7.B.1)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front brake disc excessively pitted (3.5.1h)
Nail in rear tyre
How Reliable is the Fiat Panda?
Based on 1,821,354 MOT tests across 128,867 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SC04 CVU is a 2004 Fiat Panda in Blue with a 1,242cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 57.7%.
Across all 2004 Fiat Panda models, the average MOT pass rate is 71.5% with a typical mileage of 51,788 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Panda fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 66,636 recorded failures. If you're considering buying SC04 CVU, it's worth having these areas checked by a mechanic before committing.
The Fiat Panda typically stays on UK roads for around 22 years. At 22 years old, this Fiat Panda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SC04 CVU?
You can check the full history of SC04 CVU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SC04 CVU registered?
SC04 CVU is a 2004 Fiat Panda, first registered on 15 June 2004.
Is SC04 CVU safe to buy?
The MOT history for SC04 CVU shows 26 tests with a 57.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SC04 CVU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SC04 CVU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.