MOT Status
ValidMileage
88,283 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))
Front Anti-roll bar linkage ball joint dust cover severely deteriorated BOTH (5.3.4 (b) (i))
Front Shock absorbers has slight external damage to the casing BOTH (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
HEAVILY UNDERSEALED
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Coil spring corroded BOTH (5.3.1 (b) (i))
Rear Shock absorbers has slight external damage to the casing BOTH (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))
Front Anti-roll bar linkage ball joint dust cover severely deteriorated BOTH (5.3.4 (b) (i))
Front Shock absorbers has slight external damage to the casing BOTH (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
HEAVILY UNDERSEALED
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Coil spring corroded BOTH (5.3.1 (b) (i))
Rear Shock absorbers has slight external damage to the casing BOTH (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around mounting area including outer sill (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing /strut mounting area (5.3.6 (a) (i))
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner /outer sill near front subframe mounting (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around mounting area (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material brake pipes greased (1.1.11 (c))
Front Brake hose has slight corrosion to ferrule both front (1.1.12 (f) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms rear bushs (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing both front corroded casing (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn forward bushs (5.1.2 (b) (i))
Rear Shock absorbers has slight external damage to the casing both rear casing corroded (5.3.2 (b))
Brake hose has slight corrosion to ferrule both front and both rear (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all brake pipes (1.1.11 (c))
Front Shock absorbers has slight external damage to the casing both front (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced hole in sill offside front but not with in 30cm of mountings (6.1.1 (c) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear (5.1.2 (b) (i))
Rear Shock absorbers has slight external damage to the casing both rear and lower bushes warn (5.3.2 (b))
Suspension arm pin or bush worn but not resulting in excessive movement both front lower arm (5.3.4 (a) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Brake hose has slight corrosion to ferrule both front and both rear (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all brake pipes (1.1.11 (c))
Front Shock absorbers has slight external damage to the casing both front (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced hole in sill offside front but not with in 30cm of mountings (6.1.1 (c) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear (5.1.2 (b) (i))
Rear Shock absorbers has slight external damage to the casing both rear and lower bushes warn (5.3.2 (b))
Suspension arm pin or bush worn but not resulting in excessive movement both front lower arm (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake hose has slight corrosion to ferrule both front (1.1.12 (f) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced hole in sill offside front but not with in 30cm of mountings (6.1.1 (c) (i))
Rear Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))
Rear Shock absorbers has a slightly worn bush both rear (5.3.2 (c))
Rear Shock absorbers has slight external damage to the casing both rear (5.3.2 (b))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both rear axle bushes (5.3.4 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Hydraulic brake cylinder excessively weakened by corrosion (1.1.16 (d) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Hydraulic brake cylinder excessively weakened by corrosion (1.1.16 (d) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake hose has slight corrosion to ferrule both front (1.1.12 (f) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced hole in sill offside front but not with in 30cm of mountings (6.1.1 (c) (i))
Rear Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))
Rear Shock absorbers has a slightly worn bush both rear (5.3.2 (c))
Rear Shock absorbers has slight external damage to the casing both rear (5.3.2 (b))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both rear axle bushes (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing both front corroded (5.3.2 (b))
Offside Front Brake pipe corroded, covered in grease or other material corroded near abs unit (1.1.11 (c))
Rear Brake hose has slight corrosion to ferrule both rear brake hoses (1.1.12 (f) (i))
Rear Shock absorbers has slight external damage to the casing both rear shockers and springs corroded (5.3.2 (b))
Nearside Front Brake pipe excessively corroded to rear at rear (1.1.11 (c))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded to rear at rear (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front Shock absorbers has slight external damage to the casing both front corroded (5.3.2 (b))
Offside Front Brake pipe corroded, covered in grease or other material corroded near abs unit (1.1.11 (c))
Rear Brake hose has slight corrosion to ferrule both rear brake hoses (1.1.12 (f) (i))
Rear Shock absorbers has slight external damage to the casing both rear shockers and springs corroded (5.3.2 (b))
Nearside Brake pipe corroded, covered in grease or other material main feed (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material main feed (1.1.11 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material main feed (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material main feed (1.1.11 (c))
Offside Rear Registration plate lamp insecure (4.7.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Emissions not tested due to centre pipe leaking (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Brake pipe excessively corroded corroded (1.1.11 (c))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords outer side wall (5.2.3 (d) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm also cracking (5.2.3 (e)) DANGEROUS
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Items removed from driver's view prior to test ()
Nearside Rear Nail in tyre in outer shoulder ()
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing outer wall cracked (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge just above limit (5.2.3 (e))
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Items removed from driver's view prior to test ()
Nearside Rear Nail in tyre in outer shoulder ()
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing outer wall cracked (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge just above limit (5.2.3 (e))
Items removed from driver's view prior to test ()
Exhaust has a major leak of exhaust gases back box (7.1.2)
Exhaust has a major leak of exhaust gases middle pipe (7.1.2)
damage
exhaust badly corroded and blowing
slight noise osr wheel bearing
exhaust centre and rear badly corroded /slight blow rear join
osr tyre tread perished 1556514
both front arms bushes perished
osr tyre tread perished 1556514
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
both front arms bushes perished
osr tyre tread perished 1556514
ns front to rear brake pipe slightly corroded rear
osr wheel bearing suspect noise
Exhaust has a major leak of exhaust gases (7.1.2)
ns front to rear brake pipe slightly corroded rear
osr wheel bearing suspect noise
dent passenger door
exhaust noisy and mounts badly corroded
ns front to rear brake pipe corroded
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Registration plate lamp not working (1.1.C.1d)
all tyre perished 1556514t
exhaust corroded at hangers
front brake discs worn
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
all tyre perished 1556514t
exhaust corroded at hangers
front brake discs worn
Oil leak
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SC06 YRS is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 58.1%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SC06 YRS, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SC06 YRS?
You can check the full history of SC06 YRS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SC06 YRS registered?
SC06 YRS is a 2006 Toyota Aygo, first registered on 5 July 2006.
Is SC06 YRS safe to buy?
The MOT history for SC06 YRS shows 31 tests with a 58.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SC06 YRS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SC06 YRS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.