2009 Fiat 500

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Obligatory mirror slightly damaged casing damaged (3.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

under the chassis body sealant applied

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened suspension arm/ axle (5.3.3 (b) (i))

Crankcase breather pipe burst and incomplete.

Nearside Brake cable damaged but not to excess Outer casing incomplete and compiling. (1.1.15 (a))

Nearside Front Tyre worn close to legal limit/worn on edge Inner. Pass and no more. 175/65/14 (5.2.3 (e))

Battery insecure and likely to cause a short circuit Captive fixing appears sheared. (4.13 (a) (ii))

Headlamp aim projected beam image is obviously incorrect Both. No proper beam patterns. Lamps also appear hazed. (4.1.2 (c))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Upper Shock absorbers insecurely attached Issue around top mounting/ upper spring pan. Whether failure or part/s missing. (5.3.2 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Upper Shock absorbers insecurely attached Issue around top mounting/ upper spring pan. Whether failure or part/s missing. (5.3.2 (a) (i))

Rear Exhaust system insecure "U" Clamp missing. (6.1.2 (a))

Crankcase breather pipe burst and incomplete.

Nearside Brake cable damaged but not to excess Outer casing incomplete and compiling. (1.1.15 (a))

Nearside Front Tyre worn close to legal limit/worn on edge Inner. Pass and no more. 175/65/14 (5.2.3 (e))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect diffused (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect diffused (4.1.2 (c))

Rear Brakes imbalanced across an axle 38% (1.2.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear exhaust box corroded.

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Nail in tyre

Rear Registration plate deteriorated but not likely to be misread discolouration (0.1 (b))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect dipped beam (4.1.2 (c))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

exhaust rear silencer corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

exhaust rear silencer corroded

Front Brake pad(s) wearing thin (3.5.1g)

exhaust rear silencer casing corroded

Nearside Headlamp aim beam image obviously incorrect main beam (1.8.A.1b)

Nearside Lower Headlamp insecure main beam & side position lamp unit mountings broken & insecure (1.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

exhaust rear silencer casing corroded

exhaust rear silencer corroding

Nearside Headlamp aim too high (1.8)

exhaust rear silencer corroding

Items removed from driver's view prior to test

Nearside Front Shock absorber has a light misting of oil (2.7.3)