2004 Lexus IS200

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Sub-frame corroded and seriously weakened support bracket/mounting point corroded away (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/wheel arch (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Sub-frame corroded and seriously weakened support/mounting bracket corroded away (5.3.3 (b) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Tyre has ply or cords exposed 205-55-16-91V (5.2.3 (d) (ii)) DANGEROUS

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Non obligatory mirror damaged ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge 205-55-16-91V (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Non obligatory mirror damaged ()

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust silencer slightly loose tail pipe (8.1.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material brake pipe is badly corroded and replacement will be required (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear arm bush (5.3.4 (a) (i))

Offside Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced underside of vehicle has a lot of corrosion and will need welding in the future.large hole behind rear bumper/exhaust (6.1.1 (c) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Service brake imbalanced across an axle brake discs warped/bent (1.2.1 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material brake pipe is badly corroded and replacement will be required (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear arm bush (5.3.4 (a) (i))

Offside Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced underside of vehicle has a lot of corrosion and will need welding in the future.large hole behind rear bumper/exhaust (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)