2005 Fiat Punto

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear bumper brackets corroded but non testable component

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle under sealed at time of test

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (2.4.A.3)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive near top shock absorber mount (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

brake disc worn, pitted or scored, but not seriously weakened wearing thin both front (3.5.1i)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

brake disc worn, pitted or scored, but not seriously weakened wearing thin both front (3.5.1i)

Nearside Front Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Outer Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

both front tyres have cracked sidewalls and are wearing on inner edges. could possibly provide insufficient grip on road, but is still a m.o.t pass.

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)