2005 Toyota Aygo

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sils nearside and offside. bubbling paintwork. (5.3.6 (a) (i))

Rear Outer Suspension component pin or bush slightly worn nearside and offside. (5.3.4 (a) (i))

Coolant leak ()

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))

slight damage to windscreen

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount slight play (5.3.4 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear rear shock absorbers corroded

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Play in steering rack inner joint(s) ()

both front lower ball joint split pins missing

Exhaust system insecure (6.1.2 (a))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Play in steering rack inner joint(s) ()

both front lower ball joint split pins missing

Exhaust mounting defective (6.1.2 (a))

Headlamp has a product on the light source but not seriously reducing light output both (4.1.4 (b))

o/s door mirror assembly incomplete

Front Service brake excessively fluctuating (1.2.1 (e))

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Tyre tread depth below requirements of 1.6mm both o/s (5.2.3 (e)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp has a product on the light source but not seriously reducing light output both (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

o/s door mirror assembly incomplete

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Tyre worn close to the legal limit on legal limit. Borderline pass/fail (4.1.E.1)

o/s outer sill

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Headlamp aim not tested both (1.8.A.1c)

Headlamp not working on dipped beam both (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Tyre worn close to the legal limit on legal limit. Borderline pass/fail (4.1.E.1)

o/s outer sill

Front Brake pad(s) wearing thin (3.5.1g)

both rear shockers corroded

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

both rear shockers corroded

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)