MOT Status
ExpiredMileage
143,159 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nearside rear inner well corroded
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nearside rear inner well corroded
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Headlamp aim too high (1.8)
Stop lamp not working (1.2.1b)
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
rear brake application uneven (3.7.B.2)
Tyre worn close to the legal limit (4.1.E.1)
Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
front number plate broken
Nearside Rear Torque/reaction arm severely distorted (2.4.G.1)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
front number plate broken
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 626?
Based on 311,592 MOT tests across 41,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD02 UHW is a 2002 Mazda 626 in Red with a 1,998cc diesel engine. This vehicle has been through 11 MOT tests with a personal pass rate of 63.6%.
Across all 2002 Mazda 626 models, the average MOT pass rate is 72.9% with a typical mileage of 74,022 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 626 fails its MOT is parking brake: efficiency below requirements, accounting for 25,332 recorded failures. If you're considering buying SD02 UHW, it's worth having these areas checked by a mechanic before committing.
The Mazda 626 typically stays on UK roads for around 37 years. At 24 years old, this Mazda 626 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SD02 UHW?
You can check the full history of SD02 UHW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD02 UHW registered?
SD02 UHW is a 2002 Mazda 626, first registered on 30 May 2002.
Is SD02 UHW safe to buy?
The MOT history for SD02 UHW shows 11 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD02 UHW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD02 UHW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.