MOT Status
ExpiredMileage
91,172 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Centre Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)
Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Anti-roll bar linkage severely distorted (2.4.G.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake hose excessively chafed (3.6.B.4d)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Headlamp aim too low (1.8)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear brake caliper securing device missing (3.5.1j)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust deteriorated
General underside corrossion
Nearside Headlamp aim too low (1.8)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Registration plate lamp not working (1.1.C.1d)
Exhaust deteriorated
General underside corrossion
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Headlamp does not operate immediately when selected on dipped beam (1.7.4a)
off side rear brake disc corroded
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside front brake binding (3.7.B.1)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc excessively pitted (3.5.1h)
front brake application uneven (3.7.B.2)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD03 JYA is a 2003 Mazda 323 in Silver with a 1,991cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying SD03 JYA, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SD03 JYA?
You can check the full history of SD03 JYA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD03 JYA registered?
SD03 JYA is a 2003 Mazda 323, first registered on 29 April 2003.
Is SD03 JYA safe to buy?
The MOT history for SD03 JYA shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD03 JYA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD03 JYA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.