2005 Jaguar S-type

Nearside Rear Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt suspension arm outer joint cover split (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body near subframe mount (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt suspension arm outer joint cover split (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body near subframe mount (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake cable damaged but not to excess Both outer hand brake cable outers damaged (1.1.15 (a))

Headlamp lens slightly defective Both headlamp patterns poor (4.1.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing splits on inner sidewall (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material pipes and ferrules corroded and undersealed (1.1.11 (c))

Rear subframe bushes deteriortated

Underbody corrosion and covers fitted to sills prevents further examination

Integral body structure is corroded but structural rigidity is not significantly reduced both rear inner sills and rear subframe mounts.also corrosion to outer sills (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement bushes perished (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement bushes perished (5.3.4 (a) (i))

under trays fitted and outer sill covers restricting view to some testable items

Front Headlamp lens seriously defective both (4.1.1 (b) (ii))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both rear inner sills and rear subframe mounts.also corrosion to outer sills (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement bushes perished (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement bushes perished (5.3.4 (a) (i))

under trays fitted and outer sill covers restricting view to some testable items

Headlamp lens slightly defective both headlamp lens deteriorated and patterns poor (4.1.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. close to limit, offside rear brake lags (1.2.1 (b) (i))

Rear Suspension arm ball joint dust cover severely deteriorated both rear hub lower mount covers deteriorated (5.3.4 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement various suspension bushes deteriorated (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement rose bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement rose bush (5.3.4 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement bushes perished (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt both camber arms (5.3.4 (b) (ii))

Front Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement rose bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement rose bush (5.3.4 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement bushes perished (5.3.4 (a) (i))

rear subframe bushes perishing

Bonnet primary retaining device excessively deteriorated (3.1 (c))

Front Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))

Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))

rear subframe mountings rubbers perishing

Headlamp lens slightly defective both headlamp patterns faded (4.1.1 (b) (i))

Nearside headlamp has one broken mount

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Headlamp lens slightly defective both headlamp patterns faded (4.1.1 (b) (i))

Nearside headlamp has one broken mount

Offside Front suspension arm ball joint, temp repair

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement both rear suspension arm bushes worn at mount to hub (5.3.4 (a) (i))

Tyre worn close to legal limit/worn on edge both front tyres worn on edges and close to limit (5.2.3 (e))

headlamp patterns poor

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake servo inoperative (1.1.10 (a) (ii)) DANGEROUS

Both rear discs scored and corroded

Front Tyre worn close to legal limit/worn on edge both front tyres worn on edges and close to limit (5.2.3 (e))

Headlamps patterns poor

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both rear arm bushes worn at mount to hub (5.3.4 (a) (i))

both front tyres wearing on inner and outer edges tracking reqiured

rear brake pads getting low

rear subframe bushes perished but no excessive movement

Bonnet retaining device ineffective (8.4.2)

both front tyres wearing on inner and outer edges tracking reqiured

rear brake pads getting low

rear subframe bushes perished but no excessive movement

both front tyres wearing unevenly possible tracking needed

rear brake pads 50%worn

rear subframe bushes slightly perrished

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Statutory seat belt missing (5.1.1)

Under-trays fitted obscuring some underside components

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Under-trays fitted obscuring some underside components

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Stop lamp not working (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)