MOT Status
ExpiredMileage
147,942 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
UNDER VEHICLE CORROSION
Brake lining(s) wearing thin (1.1.13 (a) (ii))
Exhaust emits blue smoke during acceleration (8.2.1.2 (g))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Brake lining(s) wearing thin (1.1.13 (a) (ii))
Exhaust emits blue smoke during acceleration (8.2.1.2 (g))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Nearside Front Brake pipe excessively corroded to rear (1.1.11 (c))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Brake pipe excessively corroded to rear (1.1.11 (c))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Windscreen washer not working (3.5 (a))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Hazard warning switch faulty (1.4.B.1d)
Offside Rear rear brake binding (3.7.B.1)
Rear Registration plate lamp not working both (1.1.C.1d)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust system not adequately supported (7.1.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
nearside rear tyre is worn inner edge
Headlamp aim too low (1.8)
o/s/f tyre worn on inner edge
o/s/f tyre worn on inner edge
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Spare tyre defective
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD06 FZL is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SD06 FZL, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SD06 FZL?
You can check the full history of SD06 FZL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD06 FZL registered?
SD06 FZL is a 2006 Toyota Aygo, first registered on 4 August 2006.
Is SD06 FZL safe to buy?
The MOT history for SD06 FZL shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD06 FZL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD06 FZL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.