2006 Toyota Aygo

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Registration plate inscription illegible (0.1 (b))

Brake hose has slight corrosion to ferrule both rear`s (1.1.12 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Registration plate inscription illegible (0.1 (b))

Brake hose has slight corrosion to ferrule both rear`s (1.1.12 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Both sills corroded

General underside corrosion

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Both sills corroded

General underside corrosion

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

general underside corrosion

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

underside rusty

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

underside rusty

corrosion too vehicle and componants, not considered excessive

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

indicator stalk faulty but still operational

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

corrosion too vehicle and componants, not considered excessive

indicator stalk faulty but still operational

Brake pipe corroded, covered in grease or other material various places (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear axle bushes slightly worn

slight corrosion too undercarriage and componants

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake pipe corroded, covered in grease or other material various places (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear axle bushes slightly worn

slight corrosion too undercarriage and componants

exhaust blowing on joint between middle and rear box

rear brake pipes and flare nuts heavily corroded

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

airbag light on

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

offside front and nearside front brake discs are corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)