MOT Status
ValidMileage
115,512 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively both (1.1.14 (a) (i))
Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Coil spring corroded both (5.3.1 (b) (i))
under body corroded
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
all under body is corroded
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe mountings (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing (5.3.2 (b))
Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing (5.3.2 (b))
Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
n/s front bumper corner damaged and loose
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
n/s front bumper corner damaged and loose
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Brake pipe corroded, covered in grease or other material both centre to rear (1.1.11 (c))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material both centre to rear (1.1.11 (c))
Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement n/s & o/s (2.4.G.2)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement n/s & o/s (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a slightly worn bush n/s & o/s (2.7.4)
Rear Vehicle structure has slight corrosion (6.1.B.2)
Service brake efficiency only just met minimum requirements, may need further adjustments or repair.
n/s & o/s rear axle bushes slightly deteriorated.
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD06 HLH is a 2006 Peugeot 107 in Red with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying SD06 HLH, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SD06 HLH?
You can check the full history of SD06 HLH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD06 HLH registered?
SD06 HLH is a 2006 Peugeot 107, first registered on 28 March 2006.
Is SD06 HLH safe to buy?
The MOT history for SD06 HLH shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD06 HLH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD06 HLH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.