2007 Ford Ka

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing/fuel filler pipes (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing (7.1.1 (a) (i))

Front shock absorbers corroded

Front tyres heaviley cracked

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear axle bushes worn

Rear inner sills and chassis corroded

Rear inner wings corroded

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

both front ball joint gaiters deteriorated but still preventing the ingress of dirt

both front lower arm rear bushes perished

both rear axle bushes perished

corrosion around fuel flap

front tyres perished

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Suspension component mounting prescribed area is excessively corroded sill at rear (2.4.A.3)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Rear coil spring broken (2.4.C.1a)

Offside Seat belt anchorage prescribed area is excessively corroded sill and door slam, 3 separate areas (5.2.6)

Offside Subframe mounting prescribed area is excessively corroded sill at front (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded sill at rear (2.4.A.3)

Body has slight corrosion (6.1.B.2)

Both front tyres cracked and perished

Exhaust has a minor leak of exhaust gases Front/Centre join (7.1.2)

Fuel filler neck corroded

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)

Nearside Subframe mounting prescribed area is corroded but not considered excessive sill at front (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)

Offside Rear Axle swivel joint has slight play (2.5.A.3b)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Shock absorber has slight corrosion to the casing Both rear (2.7.2a)

Centre Front Exhaust has a minor leak of exhaust gases flexi joint (7.1.2)

Centre Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Front both front tyres perished

Front brake disc worn, pitted or scored, but not seriously weakened both o/s and n/s inner faces (3.5.1i)

Offside Front wiper blade torn

fuel filter corroded

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

under floor fuel filter corroded

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

under floor fuel filter corroded

n/s/f tyre low at 2mm and wearing on inner outter edges

o/s/f tyre wearing oninner and outter edges low at 3mm

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Speedometer clearly inoperative (6.7.2)

n/s/f tyre low at 2mm and wearing on inner outter edges

o/s/f tyre wearing oninner and outter edges low at 3mm

both rear tyres starting to perish

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)