2008 Toyota Aygo

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear sills repaired - both sides

Age related corrosion on underside

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Emissions unable to be completed major leak (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

both rear chassis heavily corroded

front brake discs heavily corroded

front to rear brake pipes started to corrod

Brake pipe corroded, covered in grease or other material 2x F->R BPs @rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened 2x (1.1.14 (a) (ii))

Rear Shocks corroded

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Position lamp not working 2x (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Brake pipe corroded, covered in grease or other material 2x F->R BPs @rear (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened 2x (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 155/65/14 (5.2.3 (e))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

2x Rear Shock bodys corroded

exhaust hanger broken, exhuast still supported

Tyre tread depth below requirements of 1.6mm 155/65/14 (5.2.3 (e)) DANGEROUS

2x Rear Shock bodys corroded

Front Windscreen wiper blade defective (3.4 (b) (i))

exhaust hanger broken, exhuast still supported

slight damage to windscreen noted

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

slight damage to windscreen noted

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front brake discs excessively corroded and scored

front brakes grinding/harsh grating noise

Brakes imbalanced across an axle (3.7.B.5b)

front brake application uneven (3.7.B.2)

front brake juddering severely (3.7.A.2b)

front brake discs excessively corroded, pitted and scored