2011 Honda Cr-z

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output BOTH (4.1.4 (b))

Suspension/chassis corroded.

Tyre worn close to legal limit/worn on edge ALL FOUR. (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Road wheel fixing missing (one missing on each wheel) (5.2.1 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output BOTH (4.1.4 (b))

Suspension/chassis corroded.

Tyre worn close to legal limit/worn on edge ALL FOUR. (5.2.3 (e))

Exhaust has a major leak of exhaust gases Backbox corroded through (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Road wheel fixing missing 1 missing from every wheel (5.2.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Suspension component mounting repair covered in underseal underneath (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing light cracking in tread. (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases back box. (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing light cracking in tread. (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases back box. (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases Backbox (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Front both front tyres worn on edges

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

rear brake binding (3.7.B.1)

Engine covers fitted obscuring some components in the engine bay

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

both rear wheel bearings not checked as brakes binding