MOT Status
ExpiredMileage
201,156 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive behind subframe on o/s. (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge Inner and outer edge (5.2.3 (e))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge inner and outer edge (5.2.3 (e))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive infront of subframe at n/s. (5.3.6 (a) (i))
exhaust system corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive behind subframe on o/s (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive infront of subframe at n/s (5.3.6 (a) (i))
exhaust corroded
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive behind subframe on o/s (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive infront of subframe at n/s (5.3.6 (a) (i))
exhaust corroded
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front tyre worn on inner edge
Nearside Front Headlamp aim not tested (4.1.2 (b))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp aim not tested (4.1.2 (b))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front tyre worn on inner edge
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner surface (1.1.14 (a) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Registration plate lamp insecure (4.7.1 (c) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner surface (1.1.14 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Position lamp not working (4.2.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Windscreen washer not working (3.5 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Nail in tyre ()
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD12 OVM is a 2012 Mazda 6 in Black with a 2,183cc diesel engine. This vehicle has been through 13 MOT tests with a personal pass rate of 69.2%.
Across all 2012 Mazda 6 models, the average MOT pass rate is 78.0% with a typical mileage of 74,301 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SD12 OVM, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 14 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SD12 OVM?
You can check the full history of SD12 OVM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD12 OVM registered?
SD12 OVM is a 2012 Mazda 6, first registered on 17 May 2012.
Is SD12 OVM safe to buy?
The MOT history for SD12 OVM shows 13 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD12 OVM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD12 OVM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.