MOT Status
ExpiredMileage
123,417 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill section (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear rear parking (secondary) brakes imbalanced (3.7.B.6b)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded frame (5.2.6)
Offside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
o/s n/s/r outer wheelarches showing corrosion
o/s n/s/r suspension arms showing heavy corrosion
o/s/f n/s/f tyre inner treads worn
underside body frame showing corrosion
o/s n/s/r outer wheelarches showing surface corrosion
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear rear parking (secondary) brakes imbalanced (3.7.B.6b)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
o/s n/s/r outer wheelarches showing surface corrosion
front brake discs in poor condition on inside faces
front wiper blade rubbers split
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
front brake discs in poor condition on inside faces
front wiper blade rubbers split
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
play in o/s/f drop link
rear exhaust hanger snapped
Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all car very very rusty all over
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Offside front brake juddering slightly (3.7.A.2b)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside front brake juddering slightly (3.7.A.2b)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD55 ZGM is a 2005 Mazda 6 in Black with a 1,999cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 69.2%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SD55 ZGM, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SD55 ZGM?
You can check the full history of SD55 ZGM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD55 ZGM registered?
SD55 ZGM is a 2005 Mazda 6, first registered on 30 November 2005.
Is SD55 ZGM safe to buy?
The MOT history for SD55 ZGM shows 13 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD55 ZGM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD55 ZGM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.