MOT Status
ValidMileage
124,166 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))
Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear Brake repair covered in underseal (1.1.21 (e) (i))
Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Direction indicator obviously incorrectly positioned (4.4.3 (a))
Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear Brake repair covered in underseal (1.1.21 (e) (i))
Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))
Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
suspension, suspension components, structure, chassis, subframe, sills, coil springs, exhaust, hubs, brake pipe and fuel are corroded
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
suspension, suspension components, structure, chassis, subframe, sills, coil springs, exhaust, hubs, brake pipe and fuel are corroded
Emissions unable to be completed (8.2.2.2 (e))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Emissions unable to be completed (8.2.2.2 (e))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Gearbox mounting defective
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Gearbox mounting defective
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/sill (5.3.6 (a) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Brake prescribed area is excessively damaged brake pipe mounting (1.1.21 (e) (i))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected near axle bush (5.3.6 (a) (ii)) DANGEROUS
Front Gearbox mounting defective
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Coil spring corroded both. n/s + o/s. (5.3.1 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Exhaust shield missing where fitted as original equipment creating a risk of fire at fuel tank (6.1.3 (e)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust has a minor leak of exhaust gases center section (7.1.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear brake pipe painted
Offside Rear brake pipe painted
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Headlamp aim too high (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear brake pipe painted
Offside Rear brake pipe painted
Brake pipe excessively corroded (3.6.B.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD56 FSC is a 2006 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 54.8%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SD56 FSC, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SD56 FSC?
You can check the full history of SD56 FSC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD56 FSC registered?
SD56 FSC is a 2006 Toyota Aygo, first registered on 31 October 2006.
Is SD56 FSC safe to buy?
The MOT history for SD56 FSC shows 31 tests with a 54.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD56 FSC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD56 FSC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.