2006 Toyota Aygo

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Emissions unable to be completed (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axel mount (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside mirror glass cracked

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

front subframe corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

hand brake travel high

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Front tyres worn on inner edges

Offside Front slight bind

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

corrosion to underside

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened ridged/corroded (1.1.14 (a) (ii))

Emissions not tested large exhaust leak lambda high (8.2.1.2 (d))

Exhaust system insecure front bracket broken and loose on rear join (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Rear Exhaust has a major leak of exhaust gases at join (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened ridged/corroded (1.1.14 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

under side body and components covered with under schutz

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Seat belt anchorage prescribed area strength or continuity significantly reduced both rear outer sills (7.1.1 (a) (i))

Nearside Front Lower Suspension component attachment bracket/mounting likely to become detached ball joint locking device missing (5.3.3 (a) (ii)) DANGEROUS

under side body and components covered with under schutz

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Tyre worn close to the legal limit 3mm slight damage sidewall (4.1.E.1)

Offside Front Tyre worn close to the legal limit 3mm slight damage sidewall (4.1.E.1)

Road wheel with a slightly distorted bead rim x4 (4.2.A.1a)

Nearside Brake pipe excessively corroded front to rear at rear (3.6.B.2c)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Offside Brake pipe slightly corroded front to rear at rear (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate deteriorated (6.3.1d)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

cuts n/s/front tyre

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

front discs slightly corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)