CarVerify

Free Car Check

SD58 CNC

2008 Toyota Aygo

Grey Petrol 998cc
Search another vehicle

MOT Status

Expired
Expires6 Aug 2020
Tests13 (9 pass, 4 fail)
Pass rate69.2%

Mileage

88,694 mi
Last recorded88,694 miles
Recorded on18 Jul 2019
Typical for 2008 Toyota Aygo54,541 mi

Significantly above average — investigate

4 checks still locked for this Toyota
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £14.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationSD58 CNC
MakeToyota
ModelAygo
Year2008
ColourGrey
Fuel typePetrol
Engine998cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

9 pass 4 fail
Pass 18 Jul 2019 88,694 miles

Nearside Brake pipe corroded, covered in grease or other material Main front to rear. (1.1.11 (c))

Fail 13 Jul 2019 88,683 miles

Offside Brake pipe excessively corroded Main front to rear. (1.1.11 (c))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Brake pipe corroded, covered in grease or other material Main front to rear. (1.1.11 (c))

Pass 7 Aug 2018 80,952 miles

Front Sub-frame is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fail 25 Jul 2018 80,542 miles

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill holed (6.1.1 (c) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Front Sub-frame is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Pass 22 Jul 2017 60,140 miles

Brake pipe slightly corroded Both front rears (3.6.B.2c)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Pass 4 Aug 2016 45,663 miles

Offside Rear Tyre worn close to the legal limit Cracking (4.1.E.1)

Pass 3 Aug 2015 35,165 miles

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Fail 3 Aug 2015 35,165 miles

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Pass 18 Jul 2014 30,554 miles

Nearside Front Lower Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Perish Lines In Treads Of Both Rear Tyres

Fail 17 Jul 2014 30,548 miles

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Lower Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Perish Lines In Treads Of Both Rear Tyres

Pass 17 Jul 2013 24,746 miles

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Pass 23 Jul 2012 20,621 miles

surface rust front brake discs inner

Pass 31 Oct 2011 19,744 miles

How Reliable is the Toyota Aygo?

Based on 3,073,569 MOT tests across 286,185 vehicles.

80.7%
Pass Rate
4,283
Miles/Year
21
Year Lifespan
286,185
On UK Roads

Top MOT Failure Points

Tyre tread depth below requirements of 1.6mm 33,372
Full Toyota Aygo reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

SD58 CNC is a 2008 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 69.2%.

Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.

The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SD58 CNC, it's worth having these areas checked by a mechanic before committing.

The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.

Frequently Asked Questions

How do I check the history of SD58 CNC?

You can check the full history of SD58 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was SD58 CNC registered?

SD58 CNC is a 2008 Toyota Aygo, first registered on 1 November 2008.

Is SD58 CNC safe to buy?

The MOT history for SD58 CNC shows 13 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does SD58 CNC have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD58 CNC. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.