MOT Status
ExpiredMileage
108,686 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement osf front arm (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Prop shaft flexible coupling slightly deteriorated rubber coupling splitting (6.1.7 (d) (i))
Nearside Front Position lamp not working nsf dipped beam (4.2.1 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement osf front arm (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Prop shaft flexible coupling slightly deteriorated rubber coupling splitting (6.1.7 (d) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front brake back plate insecure
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front brake back plate insecure
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Exhaust mounting defective FLEXIBLE JOINT (6.1.2 (a))
Offside Front Exhaust mounting defective FLEXIBLE JOINT (6.1.2 (a))
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Nearside Rear Position lamp lens seriously defective (4.2.1 (b))
Offside Headlamp insecure (4.1.1 (c))
Offside Rear Lower Position lamp not working (4.2.1 (a))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Bonnet cannot be secured in the closed position (8.4.1)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front pads wearing low
OSF tyre wearing on outer edge
Pad warning light on
Rear pads wearing low
Front Brake pad(s) wearing thin (3.5.1g)
Items removed from driver's view prior to test
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the BMW 116?
Based on 1,638,388 MOT tests across 141,314 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SD60 YUV is a 2010 BMW 116 in White with a 1,995cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2010 BMW 116 models, the average MOT pass rate is 79.9% with a typical mileage of 72,202 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 116 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 24,729 recorded failures. If you're considering buying SD60 YUV, it's worth having these areas checked by a mechanic before committing.
The BMW 116 typically stays on UK roads for around 22 years. At 16 years old, this BMW 116 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SD60 YUV?
You can check the full history of SD60 YUV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SD60 YUV registered?
SD60 YUV is a 2010 BMW 116, first registered on 30 October 2010.
Is SD60 YUV safe to buy?
The MOT history for SD60 YUV shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SD60 YUV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SD60 YUV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.