MOT Status
ExpiredMileage
110,660 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
all 4 wheel arches poor condition
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
all 4 wheel arches poor condition
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Body has slight corrosion inner sill (6.1.B.2)
Child seat fitted not allowing full inspection of adult belt
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Anti-roll bar linkage insecure (2.4.G.1)
Nearside Rear Tie bar/rod which is adjustable, locking device insecure (2.4.G.1)
Nearside front brake binding (3.7.B.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Anti-roll bar linkage insecure (2.4.G.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc slightly pitted (3.5.1h)
damage at nearside rear
Nearside Registration plate lamp not working (1.1.C.1d)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
registration plate deteriorated (6.3.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension arm attachment bracket/mounting insecure (2.4.G.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc slightly pitted (3.5.1h)
damage at nearside rear
offside wiper torn
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Registration plate lamp not working (1.1.5c)
Offside Rear Suspension arm which is adjustable, loose in adjustment threads (2.4.G.1)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SE02 LZG is a 2002 Mazda 6 in Silver with a 1,798cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2002 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 78,488 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SE02 LZG, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 24 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SE02 LZG?
You can check the full history of SE02 LZG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SE02 LZG registered?
SE02 LZG is a 2002 Mazda 6, first registered on 29 July 2002.
Is SE02 LZG safe to buy?
The MOT history for SE02 LZG shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SE02 LZG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SE02 LZG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.