2005 Suzuki Jimny

Brake pedal has insufficient reserve travel (1.1.2 (a))

Headlamp lens seriously defective both (4.1.1 (b) (ii))

Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced full sill (7.1.1 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Seat belt anchorage prescribed area strength or continuity significantly reduced boot floor (7.1.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded at body mount (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded at body mount (6.1.1 (c) (i))

Offside Front Body component corroded and likely to cause injury sill corroded at o/s/fnear mounting (6.2.1 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength corroded mount within subframe where rebound rubber is fitted (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded at body mount (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded at body mount (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust silencer insecure rear mounting broken (8.1.1 (b) (i))

Nearside Front nearside front hub leaking grease

Integral body structure is corroded but structural rigidity is not significantly reduced general underside corrosion (6.1.1 (c) (i))

Horn not working (7.7 (a))

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced general underside corrosion (6.1.1 (c) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside hub seal leaking

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside hub seal leaking

Fuel Pipe/s corroded ()

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Fuel Pipe/s corroded ()

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear most body mount (6.2.2 (d) (i))

Oil leak, but not excessive both front axle seals (8.4.1 (a) (i))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear most body mount (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear most body mount (6.2.2 (d) (i))

Offside Rear Brake pipe inadequately clipped or supported along chassis (1.1.11 (d) (i))

Oil leak, but not excessive both front axle seals (8.4.1 (a) (i))

both front hubs seals slight leak

both rear shock absorber slight leak

offside front brake slight bind

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Back Box Exhaust Rear Section Deteriorated

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Back Box Exhaust Rear Section Deteriorated

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)