2005 Toyota Aygo

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outersill (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

front subframe corroded

Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both (6.2.2 (d) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake disc in such a condition that it is seriously weakened Both (1.1.14 (a) (ii)) DANGEROUS

Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front underbody corrosion

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front underbody corrosion

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced underneath, (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Exhaust noisy (8.1.1 (a))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Anti-roll bar links

Front Brake pad(s) wearing thin (3.5.1g)

Front brake discs worn/corroded

Nearside Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)

Nail in nearside rear tyre

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nail in nearside rear tyre

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside outer track rod end joint cover split/missing

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Non obligatory mirror damaged

Offside Front Tyre worn close to the legal limit (4.1.E.1)