MOT Status
ValidMileage
89,097 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))
Central Front Lower Gearbox mounting defective ()
Front Registration plate deteriorated but not likely to be misread Damaged (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced Corrosion underside (6.1.1 (c) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Upper Integral body structure is corroded but structural rigidity is not significantly reduced engine mount mounting corroded (6.1.1 (c) (i))
Nearside Front Upper Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill corroded (6.1.1 (c) (i))
Nearside Rear Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Lower Bumper mountings corroded but not likely to become detached Bumper support member/strengthening bar/support corroded badly holed (6.1.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Inner Oil leak, but not excessive Drive shaft seal leak (8.4.1 (a) (i))
Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced Frame corroded (6.1.1 (c) (i))
Offside Front Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill corroded (6.1.1 (c) (i))
Offside Rear Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement Solid rear axle bushes worn/deteriorated (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn Arm back bush worn (5.3.4 (a) (i))
Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))
Offside Front Lower Suspension arm pin or bush excessively worn Arm back bush worn (5.3.4 (a) (i))
Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))
Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))
Central Front Lower Gearbox mounting defective ()
Front Registration plate deteriorated but not likely to be misread Damaged (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced Corrosion underside (6.1.1 (c) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Upper Integral body structure is corroded but structural rigidity is not significantly reduced engine mount mounting corroded (6.1.1 (c) (i))
Nearside Front Upper Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill corroded (6.1.1 (c) (i))
Nearside Rear Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Lower Bumper mountings corroded but not likely to become detached Bumper support member/strengthening bar/support corroded badly holed (6.1.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Inner Oil leak, but not excessive Drive shaft seal leak (8.4.1 (a) (i))
Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced Frame corroded (6.1.1 (c) (i))
Offside Front Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill corroded (6.1.1 (c) (i))
Offside Rear Lower Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement Solid rear axle bushes worn/deteriorated (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge border line (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing border line (5.2.3 (d) (ii))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge border line (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing border line (5.2.3 (d) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))
Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
n/s/f tyre worn on edges
Nearside Front front brake binding (3.7.B.1)
Offside Front front brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
n/s/f tyre worn on edges
Front Brake pipe slightly corroded (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
o/s/f wheel bearing slightly worn
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Brake performance not tested (3.7.A.1) DANGEROUS
Nearside Brake pipe excessively corroded (3.6.B.2c) DANGEROUS
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1) DANGEROUS
Offside Brake pipe leaking (3.6.A.1) DANGEROUS
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1) DANGEROUS
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SE07 CYT is a 2007 Peugeot 107 in Black with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2007 Peugeot 107 models, the average MOT pass rate is 74.0% with a typical mileage of 56,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying SE07 CYT, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 19 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SE07 CYT?
You can check the full history of SE07 CYT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SE07 CYT registered?
SE07 CYT is a 2007 Peugeot 107, first registered on 14 May 2007.
Is SE07 CYT safe to buy?
The MOT history for SE07 CYT shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SE07 CYT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SE07 CYT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.