MOT Status
ExpiredMileage
119,285 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))
Rear axle corroded
all underside of vehicle heavily coated in underseal
Emissions unable to be completed (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))
Rear axle corroded
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
underside vehicle and most components undersealed/greased
Brake pipe excessively corroded front to rear at o/s/r hose (1.1.11 (c))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced underside very badly corroded and soft (6.1.1 (c) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
chassis and floor corroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe slightly corroded to flexi pipe (3.6.B.2c)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Centre Front Brake pipe excessively corroded (3.6.B.2c)
advise front brake disces pitted and worn
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SE08 AHA is a 2008 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SE08 AHA, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SE08 AHA?
You can check the full history of SE08 AHA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SE08 AHA registered?
SE08 AHA is a 2008 Toyota Aygo, first registered on 24 July 2008.
Is SE08 AHA safe to buy?
The MOT history for SE08 AHA shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SE08 AHA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SE08 AHA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.