2013 Hyundai I10

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint has slight play Lower ball joint. (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing Both rear tyres slightly perished. (5.2.3 (d) (ii))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre tread depth below requirements of 1.6mm Badly worn on inner edge, showing canvas. (5.2.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint has slight play Lower ball joint. (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Worn on inner edge. (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing Perished. (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Tyre slightly damaged/cracking or perishing Both rear tyres slightly perished. (5.2.3 (d) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Headlamp aim unable to be tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Shock absorbers has slight external damage to the casing Slight corrosion (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Shock absorbers has slight external damage to the casing Slight corrosion (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Short length into rear wheel cylinder (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing Slight corrosion (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Shock absorbers has slight external damage to the casing Slight corrosion (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Measuring 1.6mm in places (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge Measuring 1.6mm in places (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar has excessive play in a pin/bush drop link (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a pin/bush drop link (2.4.G.2)