MOT Status
ExpiredMileage
93,703 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe slightly corroded front to rear brake pipe corroded at the rear next to brake hose union. (3.6.B.2c)
Front Tyre worn close to the legal limit Both front tyres worn on inner edges but above 1.6mm limit. (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit nsr tyre almost on 1.6mm limit (4.1.E.1)
Front registration plate delaminated front number plate delaminated (6.3.1d)
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc nsf outer cv boot split and causing ingress of dirt (2.5.C.1a)
Rear registration plate delaminated rear number plate delaminated (6.3.1d)
Brake pipe slightly corroded front to rear brake pipe corroded at the rear next to brake hose union. (3.6.B.2c)
Front Tyre worn close to the legal limit Both front tyres worn on inner edges but above 1.6mm limit. (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit nsr tyre almost on 1.6mm limit (4.1.E.1)
Brake pipe slightly corroded FRONT TO REAR AT REAR BRAKE HOSE. (3.6.B.2c)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear registration plate faded but not likely to be misread (6.3.1d)
Nearside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded END OF OUTER SILL AS MARKED FOR I.D. (2.4.A.3)
Nearside front brake binding (3.7.B.1)
Offside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Brake pipe slightly corroded FRONT TO REAR AT REAR BRAKE HOSE. (3.6.B.2c)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear registration plate faded but not likely to be misread (6.3.1d)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Oil leak
Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Front Track rod end loose (2.2.B.1d)
Offside Outer Rear Brake pipe inadequately clipped (3.6.B.1)
all brake pipes at 'abs' pump slightly corroded
both front wishbones (rear bushes) slightly deteriorated
front exhaust flexy deteriorated
all brake pipes at 'abs' pump slightly corroded
both front wishbones (rear bushes) slightly deteriorated
front exhaust flexy deteriorated
Centre Stop lamp not working (1.2.1b)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Hyundai Getz?
Based on 1,126,487 MOT tests across 65,664 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SF03 LPA is a 2003 Hyundai Getz in Red with a 1,086cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2003 Hyundai Getz models, the average MOT pass rate is 71.6% with a typical mileage of 54,116 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai Getz fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 39,049 recorded failures. If you're considering buying SF03 LPA, it's worth having these areas checked by a mechanic before committing.
The Hyundai Getz typically stays on UK roads for around 24 years. At 23 years old, this Hyundai Getz is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SF03 LPA?
You can check the full history of SF03 LPA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SF03 LPA registered?
SF03 LPA is a 2003 Hyundai Getz, first registered on 3 March 2003.
Is SF03 LPA safe to buy?
The MOT history for SF03 LPA shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SF03 LPA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SF03 LPA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.