2003 Iveco Daily

Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i))

Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Outline marker lamp not working (4.2.1 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material various (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

corroded outwith prescriberd area

Brake pipe slightly corroded various (3.6.B.2c)

Play in steering rack inner joint(s) ()

Body has slight corrosion both front boy mounts (6.1.B.2)

Brake pipe slightly corroded various (3.6.B.2c)

handbrake only just met requirements

Brake load sensing valve seized (3.6.E.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Body has slight corrosion both front boy mounts (6.1.B.2)

Brake pipe slightly corroded various (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Brake load sensing valve inoperative (3.6.E.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Anti-roll bar linkage fractured (2.4.G.1)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Shock absorber detached (2.7.2b) DANGEROUS

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pipe excessively corroded (3.6.B.2c)

Headlamp switch faulty (1.7.1)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Front Fuel hose leaking (7.2.3)

Nearside Front All position lamps not working (1.1.A.3b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Headlamp aim too low (1.8)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Headlamp aim too low and too far to the left. (1.8)

Nearside Rear Leaf spring to axle securing bolt insecure (2.4.B.7b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Direction indicator incomplete (1.5.A1b)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.5c)

Parking brake: efficiency below requirements (3.7.B.7)

Power steering malfunctioning (2.3.3a)

Rear Brake load sensing valve linkage obviously incorrectly adjusted (3.6.E.3)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)

Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush (2.4.B.2)

Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)

Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush (2.4.B.2)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.5c)

Front Brake pad(s) wearing thin (3.5.1g)

n/s/r bumper corner insecure