MOT Status
ValidMileage
120,274 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Obligatory mirror slightly loose (3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
both front strut top mounts prescribed area corroded
Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt both front outer cv boots split (6.1.7 (g) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at rear (6.1.1 (c) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm worn both edges (5.2.3 (e)) DANGEROUS
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Obligatory mirror slightly loose (3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
both front strut top mounts prescribed area corroded
Tyre worn close to legal limit/worn on edge all four worn on edges (5.2.3 (e))
general underbody and suspension corroded
Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt both outer (6.1.7 (g) (ii))
Tyre worn close to legal limit/worn on edge all four worn on edges (5.2.3 (e))
general underbody and suspension corroded
Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength rigger (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Rear Direction indicator incorrect colour both side (4.4.3 (a))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Direction indicator slightly discoloured both (4.4.3 (a))
Offside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Exhaust emits an excessive level of metered smoke (7.4.B.3a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust emits an excessive level of metered smoke (7.4.B.3a)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp aim too low (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot Expert?
Based on 1,258,593 MOT tests across 97,542 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SF10 BXB is a 2010 Peugeot Expert in Silver with a 1,997cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2010 Peugeot Expert models, the average MOT pass rate is 69.0% with a typical mileage of 101,388 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Expert fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 34,152 recorded failures. If you're considering buying SF10 BXB, it's worth having these areas checked by a mechanic before committing.
The Peugeot Expert typically stays on UK roads for around 29 years. At 16 years old, this Peugeot Expert is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SF10 BXB?
You can check the full history of SF10 BXB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SF10 BXB registered?
SF10 BXB is a 2010 Peugeot Expert, first registered on 26 April 2010.
Is SF10 BXB safe to buy?
The MOT history for SF10 BXB shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SF10 BXB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SF10 BXB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.