MOT Status
ValidMileage
72,473 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Emissions unable to be completed (8.2.1.2 (d))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Items removed from driver's view prior to test ()
Nearside Play in steering rack inner joint(s) ()
Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Items removed from driver's view prior to test ()
Nearside Play in steering rack inner joint(s) ()
Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))
Nearside Rear Lower Coil spring corroded (5.3.1 (b) (i))
Offside Rear Lower Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Lower Coil spring corroded (5.3.1 (b) (i))
Offside Rear Lower Coil spring corroded (5.3.1 (b) (i))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Rear Brake pipe excessively corroded from flexi (1.1.11 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced corroded & holed nr suspension mount (6.1.1 (c) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security near axle mount (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security near axle mount (6.2.2 (d) (i))
Central Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake pipe corroded, covered in grease or other material From flexi forward at flexi (1.1.11 (c))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Brake pipe excessively corroded From flexi forward to body (1.1.11 (c))
Offside Rear Brake pipe excessively corroded From flexi to wheel cylinder (1.1.11 (c))
Central Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake pipe corroded, covered in grease or other material From flexi forward at flexi (1.1.11 (c))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SF13 WJE is a 2013 Peugeot 107 in Blue with a 998cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2013 Peugeot 107 models, the average MOT pass rate is 81.3% with a typical mileage of 40,622 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying SF13 WJE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 13 years old, this Peugeot 107 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SF13 WJE?
You can check the full history of SF13 WJE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SF13 WJE registered?
SF13 WJE is a 2013 Peugeot 107, first registered on 28 March 2013.
Is SF13 WJE safe to buy?
The MOT history for SF13 WJE shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SF13 WJE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SF13 WJE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.