2003 Iveco Daily

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner wheel arch - small hole - not structural

Offside Rear Inner Tyre worn close to legal limit/worn on edge On limit (5.2.3 (e))

Nearside Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Coolant leak ()

Nearside Front Body has slight corrosion Inner wing (6.1.B.2)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Body has slight corrosion Outer sill outwith prescribed area (6.1.B.2)

Oil leak ()

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Horn not working (1.6.2a)

Nearside rear parking (secondary) brake grabbing severely (3.7.B.6b)

rear brake application uneven (3.7.B.2)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Nearside Rear brake disc has slight oil contamination

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

oil leaks

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Headlamp not working on main beam (1.7.5a)

Nearside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

oil leaks

Oil leak

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Electrical wiring insecure (1.9.2a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on main beam (1.7.5a)

Offside Inner Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Outer Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Service brake: efficiency below requirements (3.7.B.7)

Oil leak

Nearside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Brake pipe excessively corroded (3.6.B.2c)

Horn not working (1.6.2a)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.C.1b)

front discs pitted

rear discs pitted

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Brake performance not tested (3.7.A.1)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pipe excessively chafed (3.6.B.2c)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)