2004 BMW Z4

Exhaust noisy (8.1.1 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Coil spring mounting insecure to the extent that relative movement is visible (5.3.1 (a) (ii)) DANGEROUS

Nearside Front Shock absorbers likely to become detached (5.3.2 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material NS and OS (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge NS and OS (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Rear Brake pipe corroded, covered in grease or other material NS and OS (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake performance not tested (1.2.1 (g))

Nearside Front Coil spring insecure incorrectly located (5.3.1 (a) (i))

Nearside Front Service brake excessively binding WHEEL BEARING NOT CHECKED (1.2.1 (f))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Aluminium undershield distorted and contacting exhaust

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Stop lamp emits other than a steady red light (1.2.1e)

Offside Front Lower Suspension arm has excessive play in a ball joint Outer (2.4.G.2)

Offside Inner Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Stop lamp emits other than a steady red light (1.2.1e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear coil spring incomplete (2.4.C.1a)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)