2008 Iveco Daily 35S12 SWB

Integral body structure is corroded but structural rigidity is not significantly reduced corroded and holed above rear axle (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside engine bay (5.3.6 (a) (i))

Offside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a))

Hazard warning switch faulty (4.4.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced corroded and holed above rear axle (6.1.1 (c) (i))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Nearside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front All outline marker lamps do not illuminate simultaneously with the position lamps side marker light (4.2.2 (a))

Nearside Rear All direction indicators incorrect colour showing white (4.4.3 (a))

Nearside Rear Leaf spring anchor pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear All direction indicators incorrect colour (4.4.3 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside All outline marker lamps not working (4.2.1 (a))

Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside All outline marker lamps not working (4.2.1 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Sub-frame corroded and seriously weakened sub frame support plate ( marked with chalk ) (5.3.3 (b) (i))

Nearside Rear Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Suspension arm attachment bracket/mounting fractured (2.4.G.1)

Offside Rear Leaf spring anchor bracket loose (2.4.B.6a)

Offside rear brake binding (3.7.B.1)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush saddle bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Anti-roll bar has excessive play in a pin/bush both rear saddle bushes (2.4.G.2)

Front registration plate delaminated (6.3.1d)

Hazard warning switch faulty (1.4.B.1d)

Horn not working (1.6.2a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Side repeater not working (1.4.A.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a major leak of exhaust gases (7.1.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Rear Leaf spring saddle is moving relative to the spring (2.4.B.7a)

Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Tyre worn close to the legal limit (4.1.E.1)

exhaust tail pipe corroded

Offside Front Side repeater slightly discoloured (1.4.A.2f)

Offside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)