2002 Mitsubishi Canter

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front play in kingpin

Offside Front play in kingpin

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all chassis corroded

Electrical wiring insecure and in contact with sharp edges near fueltank (4.11 (a) (ii))

Nearside Front Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheelarch (7.1.1 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front play in kingpin

Offside Front play in kingpin

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all chassis corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Nearside Rear Lower Shock absorber has an excessively worn bush (2.7.4)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Tyre worn close to the legal limit both (4.1.E.1)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit both (4.1.E.1)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Suspension component mounting prescribed area is corroded but not considered excessive all chassis and x members (2.4.A.3)

advise deterioration on exhaust

advise widespread corrosion on chassis

Battery insecure (1.9.1)

Brake valve has an excessive discharge of oil (3.6.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

Registration plate lamp not working (1.1.C.1d)

advise widespread corrosion on chassis

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp aim too high (1.8)

Rear fog lamp not working (1.3.2b)

Centre Brake pipe excessively corroded (3.6.B.2c)

Centre Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Outer Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear position lamp(s) insecure (1.1.A.3a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Centre Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Body has slight corrosion (6.1.B.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Body has slight corrosion (6.1.B.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

exhaust flexi joint corroded

fuel tank corroded

underside very dry / corrosion to chassis and suspension parts

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Battery insecure

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Rear Exhaust system not adequately supported (7.1.1)

Battery insecure

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Track rod end ball joint has slight play (2.2.B.1f)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Tyre worn close to the legal limit (4.1.E.1)

Vehicle structure has slight corrosion (6.1.B.2)

vin number badly corrodid on chassi leg just before wheel cannot read vin tag readable behind pass seat