2006 Toyota Aygo

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis arond rear subframe mounting several places (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected subframe mounting point repaired with filler (5.3.6 (a) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive chassis several places (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength by axle bolt (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

under side corroded

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

under side corroded

both sills starting to rust

exhaust blowing

offside rear brake binding

rear axle mounting area rusted

Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

rear axle mounting area rusted

exhaust blowing

offside rear brake binding

both sills starting to rust

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe leaking on an air braking system new pipe leaking ?? (1.1.11 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material Hose to cylinder (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

corrosion evident on brake ferrules & pipes

minor wear evident in front lower arm bushes both sides

rear shocker casings corroded

surface rust on subframe axle & under car

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

corrosion evident on brake ferrules & pipes

minor wear evident in front lower arm bushes both sides

rear shocker casings corroded

surface rust on subframe axle & under car

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust system corroded but serviceable

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

exhaust system corroded but serviceable

brake discs poor condition meet performance criteria

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)